Amina Company Logo

Edge Series


Easy to install invisible plaster-up-to loudspeaker,

giving incredible bass extension and maximum SPL

Edge Series

The latest innovation in invisible speaker technology

 

A revolutionary design for invisible loudspeaker technology, the Amina Edge offers smooth low frequency extension with increased power handling and sensitivity, resulting in a dynamic and engaging listening experience that has never before been heard from an invisible loudspeaker.

 

Building on the groundbreaking performance of the Amina’s Edge loudspeakers, the new i-series specification incorporates brand new Excelsior class high frequency drivers as well as Amina’s OptiDamping, OptiDrive, Reduced-Resonance Exciter technology and the new patented ToneRelief panel technology, all built into a plaster up-to design. These innovations result in even greater frequency extension and a much more linear response throughout the frequency range, improving on the already impressive performance of Edge loudspeakers
Designed for use in drywall installations – Once edge-filled, taped, feathered in and painted, the loudspeaker becomes fully invisible. Amina Edge speakers can also be installed as a post-plaster retrofit or in applications where the surface will receive a full wet skim (Edge speakers should not be fully plastered over).


Edge7i

Inside Edge7i

The Amina Edge7i offers smooth low frequency extension with increased power handling and sensitivity, resulting in a dynamic and engaging listening experience that has never before been heard from an invisible loudspeaker. Further building on the award-winning Edge7 loudspeaker design, the Edge7i incorporates brand new Excelsior class high frequency drivers as well as Amina’s OptiDamping, OptiDrive, Reduced-Resonance Exciter technology and the new patented ToneRelief panel technology all built into a plaster up-to design

The Edge Soundboard

The speaker uses a high quality fire-resistant panel material which allows for seamless integration into plasterboard walls and ceilings without the need for a full wet skim, all in the easy to install, lightweight form-factor that Amina is known for.

Amina Tip:
Plaster up-to refers to the installation method and how the loudspeaker becomes invisible once installed. Edge speakers are installed much like a section of tapered-edge plasterboard, with the perimeter filled, taped and then fully painted over. When installed in this way, the loudspeaker becomes fully invisible, much like our plaster-over loudspeakers, but without the requirement for a full wet plaster skim.

Support Products

The Backbox CV345 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission.

 

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack.

APUi70C information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for Edge Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation.

APU-RSiC information >

SpecificationEdge7i
Nominal Impedance4 Ohms
Power Handling75W/150W
Sensitivity90dB 1m/2.83Vrms
Frequency Response50Hz - 27kHz (-6db)
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions450mm x 345mm x 36mm (173/4” x 135/8” x 127/64”)
Product Weight1.8Kg (3lbs 16oz)
Fixing RequirementsBackboxCV345
In-line Protection unitAPUi70C_2
Rack-Mount Protection UnitAPU-RS8iC or APU-RS16iC
Warranty10 Years Residential (5 Years Commercial)
Datasheet Edge7i Datasheet


Edge5i

Inside Edge5i

The Amina Edge5i offers smooth low frequency extension and increased low-mid performance, resulting in a dynamic and engaging listening experience that has never before been heard from an invisible loudspeaker. Building on the groundbreaking performance of the Edge5 loudspeaker, the Edge5i features brand new Excelsior class high frequency drivers as well as Amina’s OptiDamping, OptiDrive, Reduced-Resonance Exciter technology and the new patented ToneRelief panel technology all built into a plaster up-to design.

Note: The ‘i’ upgrade to the Edge5 includes a change of impedance. The new Edge5i is now rated at a more efficient .

The Edge Soundboard

The speaker uses a high quality fire-resistant panel material which allows for seamless integration into plasterboard walls and ceilings without the need for a full wet skim, all in the easy to install, lightweight form-factor that Amina is known for.

Amina Tip:
Edge Series speakers are designed to be installed into walls and ceilings where there is to be no wet plaster skim, however it is still possible to install the speaker where there are such finishes.

Support Products

The Backbox CV345 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission.

 

Note: Edge loudspeakers not compatible with solid-wall installation.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack.

APUi50C information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for Edge Series Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation.

APU-RSiC information >

SpecificationEdge5
Nominal Impedance8 Ohms
Power Handling50W/100W
Sensitivity90dB 1m/2.83Vrms (APUi50C connected)
Frequency Response65Hz - 20kHz (±6db) mounted in Backbox CV345
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions345mm x 450mm x 33mm (135/8” x 173/4” x 15/16”)
Product Weight1.24Kg (2lbs 12oz)
Fixing RequirementsBackboxCV345
In-line Protection unitAPUi50C
Rack-Mount Protection UnitAPU-RS8iC or APU-RS16iC
Warranty10 Years Residential (5 Years Commercial)
Datasheet Edge5 Datasheet


Edge3

Inside Edge3

The Amina Edge3 uses the same resin-core panel technology of the larger Edge series speakers, but in a smaller more compact package. Using the same design principals as it’s larger counterparts, the Edge3 is the perfect plaster-up-to loudspeaker for contractors and entry-level invisible sound systems.

The Edge Soundboard

The speaker uses a high quality fire-resistant panel material which allows for seamless integration into plasterboard walls and ceilings without the need for a full wet skim, all in the easy to install, lightweight form-factor that Amina is known for.

Amina Tip:
Edge3 is designed for drywall installation (no wet mud skim), but can be filled and feathered in, painted or wallpapered over to create a seamless finish.

Support Products

The Backbox CV300 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission.

 

Note: Edge loudspeakers not compatible with solid-wall installation.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack.

APUi30C information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for Edge3 Loudspeakers. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation.

APU-RSi information >

SpecificationEdge3
Nominal Impedance8 Ohms
Power Handling30W/60W
Sensitivity86dB 1m/2.83Vrms (APUi50 connected)
Frequency Response80Hz - 30kHz (-6db)
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions300mm x 400mm x 55mm (114/5” x 153/4” x 13/5”)
Product Weight1Kg (2lbs 2oz)
Fixing RequirementsBackboxCV300
In-line Protection unitAPUi30C
Rack-Mount Protection UnitAPU-RS8iC or APU-RS16iC
Warranty10 Years Residential (5 Years Commercial)
Datasheet Edge3 Datasheet
DatasheetInstall GuideImagesCAD
Edge3 Datasheet Edge Install Guide Edge3Coming soon

Visit Downloads Page >