Amina Company Logo

Evolution Series


Slimline Invisible Loudspeaker

designed for narrow stud spacings.

Evolution Series

Slimline plaster-over loudspeaker

 

Designed for installation where space is at a premium, either where stud spacing is reduced or where loudspeakers need to be built into furniture.

 

Designed to be used with either a full wet plaster skim (2mm) or with a covering such as wood veneer or high pressure laminate (Amina veneer adhesive available),  the Evolution AIW350iN-S200 loudspeakers offer a slimline flexible invisible sound solution.


AIW350iN-S200 Slimline

Inside S200

Using the same OptiDrive and VPT technology found in Mobius Series loudspeakers, the AIW350iN-S200 provides a slimline medium powered solution for invisible background music solutions.

The AIW350iN-S200 Soundboard

With the same incredibly lightweight, stiff and resonant panel material that is used with the Mobius Series, the AIW350iN-S200 speaker is designed to work with the covering material to produce great high frequency detail. Given the small size, the AIW350iN-S200 speakers may be used where other larger panels cannot be fitted.

Amina Tip:
The AIW350iN-S200 is designed to be installed into walls and ceilings where there is to be a wet plaster skim, however it is also possible to install it into other materials such as wooden paneling, behind leather, high pressure laminates and other veneers. Please note that you may need to also order additional laminate adhesive for any veneer application. Adhesive will be applied to the loudspeaker at point of manufacture.

Support Products

The Backbox CV200 creates an acoustically tuned and consistent cavity behind the speaker, helping to ensure both consistent audio quality as well as minimising rearward airborne sound transmission where the AIW350iN-S200 is installed into stud walls/ceiling.

 

The BackboxSW200 provides a strong mechanical fixing method for solid blockwork and concrete walls/ceilings.

Backbox information >

All new slim-line design, giving reliable speaker protection for life-time worry free performance, in a unit that can be conveniently dressed back with any cable management system or sit neatly behind the rack. Please note that the AIW350i-S200 speaker requires the ‘non-C’ variant of the APUi30.

APUi information >

Both 8-channel and 16-channel passive rack-mounted protection units are available for the AIW350iN-S200. For use in installations with higher numbers of low-impedance speakers with a centralised AV rack. Direct-to-PCB screw terminal-blocks allow for fast and easy permanent installation. Please note that AIW350iN-S200 requires the ‘non-C’ variant of protection unit, for example APU-RS16i.

APU-RS information >

SpecificationiQ3
Nominal Impedance8 Ohms
Power Handling30W/60W
Sensitivity84dB 1m/2.83Vrms (APUi30 connected)
Frequency Response130Hz - 20kHz (±6db) mounted in Backbox CV300
Electrical ConnectionBlue butt-splice crimp terminals (14-16 AWG)
Dimensions200mm x 4500mm x 40mm (173/4” x 77/8” x 15/8”)
Product Weight1.1Kg (2lbs 7oz)
Fixing RequirementsBackboxCV200
In Line Protection unitAPUi30
Rack-Mount Protection UnitAPU-RS8i or APU-RS16i
Warranty10 Years Residential (5 Years Commercial)
Datasheet AIW350iN-S200 Datasheet